My company flat turn leaching process characteristics
1 . The use of stainless steel fixed grid plate, an increase of the horizontal grid plate to prevent the condensed oil back into the falling material grid, thus ensuring the leaching effect;
2 . The flat spinning extractor adopts rack drive, unique rotor balance design, low speed, equipped with small power, smooth operation without noise, maintenance costs are very low;
3. The feeding system automatically adjusts the speed of the feed scraper according to the incoming quantity, so that the material tank always keeps a certain level, which is conducive to the formation of micro-negative pressure inside the extractor to reduce the leakage of the solvent;
4. Advanced mixed oil cycle principle design is conducive to reducing the amount of fresh solvent inputs, reduce residual oil in the meal, improve the concentration of mixed oil, by reducing the amount of evaporation to achieve the purpose of energy conservation;
5. The design of the high material layer of the extractor is conducive to the formation of soaking leaching and reducing the content of the pulp in the mixed oil, which is beneficial to improve the quality of the crude oil and reduce the fouling of the evaporation system.
6. Especially for a variety of pre-pancake leaching.
I use the company is a new type of efficient TDC series steam off the machine
The steam off-off is the key equipment for the anti-trophic factors of dehumidification and passivation of wet meal in the oil mill. My company under the guidance of many years of practice under the guidance of a new and efficient knife TDC steam off the machine, set desolate, dry bath, cooling in one, simple operation, product quality and stability:
1 . Unique through the steam plate design, so that the mixed vapor from the evaporation layer when the layer evenly through the material layer, and not wet meal from the steam in the fall, the mixed gas vapor phase temperature can be reduced to 70 degrees, not only the solution effect , And save a lot of direct steam, reducing the condensing load of the condenser;
2 . The stripping of the vaporized layer, using the automatic control of the blanking door, ensures a constant level of dewatering and sufficient deodorization time, and separates the vaporized layer from the lower drying layer, avoiding a small amount of solvent Downstream losses;
3. The main shaft of the steam cutting machine uses a fixed bearing to fix the upper shaft head and a push bearing to fix the lower shaft head. To avoid the weight of the big shaft and the mixing knife and the reaction of the material are pressed down to the reducer, resulting in damage to the reducer, life is not long and energy consumption and so on. With the rolling bearing on the shaft head fixed in the steam off the machine, once the damage is very easy to replace;
4. Advanced automatic material door system, full rolling bearing design, flexible operation, long life, good positioning, effectively avoiding the solvent leakage. The wet trap in the upper part of the steam-off machine adopts the imported atomizing nozzle, and the maximum amount of fine meal in the mixed gas of the steam-extender effluent is beneficial to the steam-heat exchange effect, which avoids the further A series of problems caused by steaming into the tank.
My company off the advantages of steam off:
1, passivation and destruction of meal in the urease and trypsin and other anti-nutritional ingredients to improve the use of meal value;
2, control meal protein denaturation, effectively improve the meal of the NS work index;
3, better adjust the color of the meal flavor and size;
4, to better reduce the residue in the meal, adjust the moisture of the meal, so as to ensure the lowest production; capacity consumption and the safe use of meal;